SAE AMS4041 Aluminum Alloy, Alclad Sheet and Plate, 4.4Cu - 1.5Mg - 0.60Mn, Alclad 2024 and 1-1/2% Alclad 2024, -T3 Flat

上一篇: SAE AMS2809 Identification, Titanium and Titanium Alloy Wrought Products
下一篇: SAE AMS6305 Steel, Heat-Resistant, Bars, Forgings, and Tubing, 0.95Cr - 0.55Mo - 0.30V (0.40 - 0.50C), Vacuum Arc Remelt

Product Code:SAE J1470
Title:Measurement of Noise Emitted by Accelerating Highway Vehicles
Issuing Committee:Light Vehicle Exterior Sound Level Standards Committee
Scope:This SAE Standard is equivalent to ISO Standard 362 - 1997 except for the differences detailed in Appendix A, and includes the modifications adopted by WP 29 in ECE R51 Revision 1 and EEC 92/97 and EEC 96/20.This document specifies an engineering method for measuring the noise emitted by accelerating highway vehicles of all types (except motorcycles) in intermediate gears with full utilization of the available engine power.The method is designed to meet the requirements of simplicity and reproducibility of results under realistic vehicle operating conditions.Measurements relate to operating conditions of the vehicle which give the highest noise level consistent with urban driving and which lead to reproducible noise emissions. Therefore, an acceleration test at full throttle from a stated engine or vehicle speed is specified.The test method calls for an acoustical environment which can only be obtained in an extensive open space. Such conditions can usually be provided for:a. Measurements at the manufacturing stageb. Measurements at official testing stationsMeasurements must be carried out in an acoustical environment which fulfill the requirements stated in this document. It should be noted that spot checking of vehicles chosen at random can rarely be made in an ideal acoustical environment. If measurements have to be carried out on the road in an acoustical environment which does not fulfill the requirements stated in this document, it should be recognized that the results obtained may deviate appreciably from the results obtained using the specified conditions.The results obtained by this method give an objective measure of the noise emitted under prescribed conditions of test. However, it is necessary to consider the fact that the subjective appraisal of the annoyance of different classes of motor vehicles is not simply related to the indications of a sound level meter. The motorcycles are covered in other SAE documents that prescribe an operating mode that is more representative of actual use.

标准名称：	通用卡箍 悬挂单卡箍
中标分类：	航空、航天 >> 航空器与航天器零部件 >> 管件、卡箍、密封件
ICS分类：	航空器和航天器工程 >> 航空航天用零部件
替代情况：	QJ 186-78
发布日期：
实施日期：
首发日期：
作废日期：
出版日期：

没有内容

没有内容

没有内容

没有内容